Champion XL200-1-9/16 RotoBrute 1-9/16-Inch Annular Cutter, 2-Inch Depth

RotoBrute HSS Annular Cutters are made from M2 Steel. Featuring Champion's exclusive PLUS20 surface treatment, providing cleaner cuts, positive slug ejection and longer tool life.Recommended for materials with a brinell harness number up to 275.Cut clean, bur free holesPrecision pilot pins eject the center as a plug of steelCuts cast iron, steel and ultra hard or exotic alloys


Champion XL200-1-9/16 RotoBrute 1-9/16-Inch Annular Cutter, 2-Inch

drill press reviews

Motor hums but no torque on inexpensive table top drill press?

The motor won't start revolving but seems well lubricated. Up to this point in time it has always worked fine. I'm not aware of anything that I did to change this since it just sits in the garage between uses. This is one of those inexpensive, under $100, drill presses that has worked fine for light jobs. What type of troubleshooting could I do with a VOM or taking motor cap of and visually inspecting? How would I know by looking inside the motor cage if something was not

drill press reviews

Fein 63127410010 1/2-Inch and 1-Inch HSS Prima 1-Inch Annular Cutter

Ability to cut 7/16 of an Inch up to 11/4-Inch with 1-Inch depthCan cut up to 130,000 lbf/in tensile strength5-Percent cobalt hardened for longer lasting life and quicker cutsQuick in shank for ease of use and faster rate of workAlso suitable for aluminum and other non-ferrous metals
Product DescriptionManufactured from premium High Speed Steel with a uniqe cuttiing design which will increase the speed of productivity and durability of the cutter. Rugged design even for structural steel

drill press reviews

Champion XL200STK-7/8-Inch RotoBrute 7/8-Inch Cobalt Stack Cut Annular Cutter, 2-Inch Depth

RotoBrute Cobalt Stack Cut Annular Cutters are made to cut cleanly through several layers of steel and positive slug ejection.Recommended for materials with a brinell harness number up to 275.Cut clean, bur free holesCuts cast iron, steel and ultra hard or exotic alloys


Champion XL200STK-7/8-Inch RotoBrute 7/8-Inch Cobalt Stack Cut Annular Cutter, 2-Inch

drill press reviews

Champion XL200-3 RotoBrute 3-Inch Annular Cutter, 2-Inch Depth

RotoBrute HSS Annular Cutters are made from M2 Steel. Featuring Champion's exclusive PLUS20 surface treatment, providing cleaner cuts, positive slug ejection and longer tool life.Recommended for materials with a brinell harness number up to 275.Cut clean, bur free holesPrecision pilot pins eject the center as a plug of steelCuts cast iron, steel and ultra hard or exotic alloys


Champion XL200-3 RotoBrute 3-Inch Annular Cutter, 2-Inch

drill press reviews

Champion XL200STK-1/2-Inch RotoBrute 1/2-Inch Cobalt Stack Cut Annular Cutter, 2-Inch Depth

RotoBrute Cobalt Stack Cut Annular Cutters are made to cut cleanly through several layers of steel and positive slug ejection.Recommended for materials with a brinell harness number up to 275.Cut clean, bur free holesCuts cast iron, steel and ultra hard or exotic alloys


Champion XL200STK-1/2-Inch RotoBrute 1/2-Inch Cobalt Stack Cut Annular Cutter, 2-Inch

drill press reviews

Fein 63127417010 15/16-Inch and 1-Inch HSS Prima 1-Inch Annular Cutter

Ability to cut 7/16 of an Inch up to 1-1/4-Inch with 1-Inch depthCan cut up to 130,000 lbf/in tensile strength5-Percent cobalt hardened for longer lasting life and quicker cutsQuick in shank for ease of use and faster rate of workAlso suitable for aluminum and other non-ferrous metals
Product DescriptionFein 63127417010 HSS PRIMA 1" - 15/16"

Fein 63127417010 15/16-Inch and 1-Inch HSS Prima 1-Inch Annular

drill press reviews